Lumière Clinic is being prepared
We're personalizing your experience, please wait...
Aesthetic & Plastic Surgery
Lumière ClinicCyprus Aesthetic & Plastic Surgery Center

Clarity II Laser

Laser Treatments

Technology Detail

Laser Treatments
Clarity II Laser

Cutera Clarity II is a dual-wavelength laser platform combining 755 nm alexandrite and 1064 nm Nd:YAG. It is used for laser hair removal, superficial vascular lesions and pigmented targets such as sun spots.

Session Duration 30-60 minutes
Number of Sessions 3-6 sessions
Consultation Free of Charge
Clarity II Laser

What is Clarity II Laser?

Clarity II is a dual-wavelength laser platform made by Cutera, a US medical laser manufacturer. It combines 755 nm alexandrite and 1064 nm Nd:YAG wavelengths in a single system and is used mainly for laser hair removal and vascular lesions, and in selected superficial pigmented lesions.

The device includes a real-time skin temperature monitoring system called IntelliTrak, which tracks surface temperature during treatment and helps keep energy delivery controlled. The 1064 nm wavelength is generally preferred in darker skin types, although no wavelength carries the same safety margin across every skin type; parameters are set individually.

Clarity II is not a solution for every skin concern. It does not address sagging, significant excess skin or deep wrinkles, where other approaches are considered. In hair removal the goal is permanent hair reduction, not the indefinite disappearance of every hair. Response is limited in light, white and fine hair, new hairs may appear over time for hormonal reasons, and maintenance sessions may be needed.

How much a pigmented or vascular lesion improves depends on its depth, on skin type and on individual response; new pigmentation can develop if sun protection is not maintained. Whether the device is suitable for you can only be determined by a medical examination.
What is Clarity II Laser?

How Does It Work?

The Clarity II laser system is based on the principle of Selective Photothermolysis. This principle relies on light at specific wavelengths selectively heating specific chromophores (colored target molecules). The 755nm Alexandrite wavelength specifically targets melanin pigment, while the 1064nm Nd:YAG wavelength penetrates deeper tissues to treat hemoglobin and deep melanin targets.

During treatment, laser energy is absorbed by the target chromophore and converted to heat. This heat destroys the target cell or structure while causing minimal damage to surrounding tissues. The IntelliTrak™ system measures skin temperature with each pulse, preventing overheating and ensuring homogeneous energy distribution.

Thanks to the device's adjustable spot size (2-16mm), pulse duration (0.3-300ms), and energy density, personalized treatment protocols can be created for each patient. Larger spot sizes reach deep targets, while smaller spot sizes allow fine work in delicate areas.
1

Skin Analysis and Planning

Expert dermatologist analyzes your skin with dermoscopy, evaluates skin type (Fitzpatrick scale), spot depth and vascular structures. Personal treatment plan and expected session count are determined.

2

Wavelength and Parameter Selection

755nm (superficial pigment, hair removal) or 1064nm (deep spots, vessels, dark skin) is selected based on the problem. Spot size, pulse duration and energy density are adjusted.

3

IntelliTrak™ Laser Application

Laser is systematically applied to the treatment area. Real-time temperature sensors monitor the skin and make automatic energy adjustments. Each area receives equal and safe dosage.

4

Cooling and Evaluation

Post-treatment cooling is applied, immediate skin reaction is evaluated. Parameters for next session are noted, care prescription is prepared.

Treatable Conditions

Thanks to its dual-wavelength design and adjustable parameters, Clarity II can be used across a range of indications. Protocols are adapted to skin type and tone, and 1064 nm is generally preferred in darker skin. No laser, however, is free of risk in any skin type: burns and temporary darkening or lightening of the skin can occur, and appropriate parameter selection depends on medical assessment.
Sun spots (solar lentigines) and age spots — hyperpigmentation from UV damage
Melasma (chloasma / pregnancy mask) — hormonally driven deep pigmentation
Post-inflammatory hyperpigmentation — dark spots after acne, wounds or burns
Capillary dilations (telangiectasia) — fine red vessels on face and legs
Cherry angioma — small red moles
Rosacea and facial redness — chronic facial flushing and vascular symptoms
Acne scars and atrophic scars — post-acne pitting and irregularities
Enlarged pores — especially in T-zone and cheeks
Skin tone irregularities and dull appearance
Laser hair removal — long-term reduction on face, underarms, bikini, legs and full body
Photorejuvenation — collagen stimulation for overall skin quality improvement
Poikiloderma — sun damage on neck and décolleté

Technical Specifications

Manufacturer
Cutera Inc. (USA, Silicon Valley)
Wavelengths
755nm Alexandrite + 1064nm Nd:YAG
Pulse Mode
Normal Pulse, Long Pulse
Pulse Duration
0.3ms – 300ms (adjustable)
Spot Size
2mm – 16mm (adjustable)
Max Energy
300J/cm² (755nm), 500J/cm² (1064nm)
Repetition Rate
0.5 – 10 Hz
Cooling System
IntelliTrak™ real-time thermal monitoring
Skin Types
Fitzpatrick I – VI (all skin tones)
Dimensions
45 × 45 × 110 cm
Weight
90 kg
Power
220-240V, 30A

Benefits & Advantages

Dual Wavelength (755nm + 1064nm)

Ability to treat both superficial and deep targets with a single device. Wavelength switching takes seconds.

IntelliTrak™ Technology

Real-time skin temperature monitoring aims to keep every pulse within a controlled dose.

Suitable for All Skin Types

Applicable across Fitzpatrick I-VI skin tones, with parameters adjusted to skin type.

Minimal Downtime

Post-procedure redness usually settles within a few hours. Most people return to daily life the same day.

Gradual, Visible Results

Change becomes clearer as sessions progress, with cumulative improvement. Results vary from person to person.

Treatment Comfort

Integrated cooling and adjustable parameters improve comfort; perceived discomfort varies from person to person.

Wide Application Range

Hair removal, pigmentation, vessels, acne scars, rosacea and rejuvenation with one device.

Treatment Process

Clarity II laser treatment follows a systematic protocol from consultation to results evaluation. Each stage is meticulously planned to ensure maximum safety and efficacy. Before treatment, the patient's medical history, medications, sun exposure and expectations are thoroughly evaluated.
1

Pre-Consultation

Our expert plastic surgeon and dermatologist analyze your skin with dermoscopic examination. Spot depth, vascular structures and skin type are evaluated. Medical history and medications (especially retinoic acid, blood thinners) are reviewed. Realistic expectations and personalized treatment plan are established.

2

Pre-Treatment Preparation (2 Weeks Before)

Sun exposure avoidance is recommended, SPF 50+ use is initiated. Retinoic acid and AHA/BHA products are discontinued 1 week before. Aspirin and blood thinners are stopped with doctor approval. Self-tanning products are avoided.

3

Treatment Day (30-45 Minutes)

Treatment area is gently cleansed. Topical anesthetic cream is applied where needed (15-20 min wait). Wavelength, spot size and energy parameters are set based on skin analysis. Laser is applied with systematic scanning technique; IntelliTrak™ provides active monitoring throughout.

4

Post-Treatment Care

Cold compress and moisturizer applied. SPF 50+ sunscreen prescribed. 48-hour avoidance of sauna, hammam, intense exercise and hot water recommended. Follow-up appointment in 2 weeks for treatment response evaluation.

Session Information

Session Duration
30-45 minutes (varies by treatment area)
Number of Sessions
Pigmentation treatment: 3-5 sessions | Hair removal: 6-8 sessions | Vascular treatment: 2-4 sessions | Skin rejuvenation: 3-6 sessions
Session Interval
Pigmentation/vascular: 3-4 weeks | Hair removal: 4-6 weeks | Rejuvenation: 4 weeks
Results
Change can be seen from the first sessions and increases cumulatively with each session. Full results appear 4-6 weeks after the final session. Results vary from person to person.
Consultation
Online or in-clinic

Who Is It Suitable For?

Clarity II can be used in a wide group of patients, but it is not suitable for everyone. Suitability is judged by considering skin type, the condition being treated, current medication, recent sun exposure and general health together.

Treatment is postponed or not performed during pregnancy and breastfeeding, on recently tanned skin, where there is active skin infection or an open wound, during isotretinoin use and for six months after stopping it, in people taking photosensitising medication, and in those prone to keloid scarring. This assessment is made at the consultation.

Suitable Candidates

  • Individuals with sun spots, age spots or melasma
  • Those with capillary dilation (telangiectasia) on face, neck or legs
  • Men and women seeking long-term laser hair reduction (all body areas)
  • Those with acne scars, wound scars and uneven skin texture
  • Those seeking overall skin rejuvenation and radiance
  • Those seeking rosacea and chronic facial redness treatment
  • Adults over 18 in good general health
  • Those who had insufficient results from chemical peeling or IPL and want to switch to laser

Not Suitable For

  • Pregnant or breastfeeding women
  • Those with intense sun exposure or tanning bed use in the past 2 weeks
  • Areas with active skin infection, herpes simplex or open wounds
  • Those using isotretinoin (Roaccutane) or who discontinued in the past 6 months
  • Those with photodermatosis or extreme light sensitivity
  • Uncontrolled diabetes or immune system disorders
  • Those with keloid or hypertrophic scar formation tendency

Comparison with Other Methods

Feature This Technology Traditional
Pain Level Minimal (IntelliTrak™ cooling) Medium-High (IPL/Chemical Peel)
Treatment Duration 30-45 minutes 60-90 minutes
Recovery 2-4 hours mild redness 3-14 days (varies)
Session Count 3-5 sessions (average) 6-12 sessions (IPL)
Skin Types All types (Fitzpatrick I-VI) Limited (usually I-IV)
Safety Real-time thermal monitoring (IntelliTrak™) Operator dependent
Versatility Spots, vessels, hair removal, rejuvenation Usually single purpose
Return to Daily Life Same day 1-7 days (varies)

Frequently Asked Questions

Clarity II is a comfortable laser treatment thanks to its integrated IntelliTrak™ cooling system. Most patients describe only a slight warmth or a brief rubber-band snap sensation. Comfort can be improved further with topical anesthetic cream on sensitive areas. Perceived discomfort varies from person to person.
Session count varies by condition: 3-5 for pigmentation, 6-8 for hair removal, 2-4 for vascular treatment, 3-6 for rejuvenation. Change becomes clearer as sessions progress, with cumulative improvement. Full results appear 4-6 weeks after the last session as collagen remodeling takes time. The number of sessions needed varies from person to person.
The most important post-treatment rule is sun protection: minimum SPF 50+ broad spectrum sunscreen applied 2-3 times daily. Avoid sauna, hammam, hot shower, intense exercise and swimming pools for 48 hours. Do not apply retinol, AHA/BHA or vitamin C serum to the treated area for 1 week. Continue skincare with gentle cleanser and moisturizer. Mild redness and minimal swelling are normal and resolve within hours.
Treated pigment spots and vascular lesions can largely be cleared, but regular sun protection is essential to prevent new spots. Laser hair removal provides long-term reduction in the treated follicles; new hairs may appear due to hormonal changes and are managed with maintenance sessions. Rejuvenation effects fade over time and are maintained with follow-up sessions. The duration of results varies from person to person.
Yes, this is one of Clarity II's greatest advantages. Thanks to its dual-wavelength system and IntelliTrak™ technology, it can be safely applied to all skin tones from Fitzpatrick I (very fair) to VI (very dark). The 1064nm Nd:YAG wavelength is preferred for dark skin to minimize epidermal damage. This solves the problem of many laser systems being unable to treat dark skin.

Are You Ready to Meet This Technology?

Our expert team is here to create the most suitable treatment plan for you. Make an appointment or ask your questions.

Share This Technology

How can we help you?

Lumiere Clinic

Online - We respond immediately